Dodge Challenger P0456: EVAP System – Small Leak
This is one of the most commonly encountered trouble codes for the Dodge Challenger Is the Code P0456. This code is the trouble number. It refers to a number given when you plug in your Challenger. OBDII scanner. A P0456 code indicates that there may be a slight leakage in the evaporative exhaust control system. This code is often found with or related to P0420,P0441 and, very rarely, P0440.
Your Challenger's drive-ability is generally not affected by P0456. Certainly anytime the service engine soon light is on, it’s good to deal with it as soon as possible.
While the trouble code may state that there is a “small leak” in the EVAP system of your Dodge Challenger, it is actually referring to the amount of pressure lost, and not the physical size of the leak. This can happen in very small amounts.
Dodge Challenger P0456 Definition
The universal OBDII code P0456 can be used to diagnose trouble codes. It means that no matter what make or model vehicle you have, this code will always mean the same (Challenger or otherwise). Technically, the code stands for:
System Leakage of Small Size – Evaporative Emission System
The EVAP captures any fuel vapor in the fuel tank. They are then sent to the intake of the engine to start the combustion process. When there is a small leak in the Dodge Challenger’s EVAP system, it will throw the P0456 OBDII Code. If there is a large leak, it’ll throw P0455.
Dodge Challenger P0456 OBDII Code Symptoms
The P0456 code is usually not accompanied with any other symptoms than those listed. Smells like gas And the service engine soon light.
The fuel tank and fuel filler tubes should smell particularly strong.
The EVAP system is responsible for fuel vapors. If these vapors are leaking from the system, you’ll often smell them faintly while operating the vehicle. But, it won’t affect the way the engine itself runs. The EVAP technology deals only with the fuel vapor but not how the engine runs.
Challenger P0456 Trouble Cod Causes
The P0456 code can be triggered by many factors in your Dodge Challenger. If your Challenger has warned you at all in the last few months that the fuel cap was off when it wasn’t, then replacing it would be a great first step.
These are some of the most frequent problems that can throw off the code. They're listed in alphabetical order, from the most likely to the least.
- Hose for Evap System– The hose that carries the fuel vapor from the fuel tank to the intake manifold can begin to leak. This can lead to the code P0456. You should look for a hole or a tear in the code. This is one of most frequent causes for the code.
- Vapor Canister Purge Valve– One of the most common causes of the P0456 code is the vapor canister purge valve. It’s really easy to replace. There are some clips you will need to look for and then remove.
- Fuel Tank Sending Unit– It is possible for the gasket that attaches the fuel sending unit to the gas tank to go bad. It can lower the tank pressure, which could throw out the code.
- Fuel Cap– A bad fuel cap can cause the code to be thrown for sure. Often, you’ll get a message informing you that the fuel cap is off even when it is on. You may not get the message but a P0456. This will save you time and money.
- Fuel Filler Neck– There is often a gasket where the fuel filler neck connects with the gas tank. It is possible for this gasket to dry, particularly if vehicles spend a lot of time in dry environments. When it dries out, the fuel tank can’t hold pressure anymore.
Dodge Challenger Diagnostics - P0456
The mechanic will have a lot of different tools at his disposal in order to determine the cause of your Dodge Challenger P0456. The most commonly used methods to diagnose this code are:
- The mechanic will usually check for any additional trouble codes. A mechanic will usually check for additional trouble codes to help diagnose the problem. That’s because when they appear together in certain combinations, there will often only be only a few conditions that will throw any combination of codes at one time.
- Once the mechanic has determined the trouble codes associated with P0456, he or she will usually Take a look at the EVAP system. It includes the purge valve and line as well as the canister.
- A mechanic will examine the gas cap and verify that it is able to withstand high pressure. If you are getting a warning that your gas cap is off, even when it’s on, replacing it will more than likely clear this code.
- Monitor and check the pressure in your fuel tank.
- The mechanic will then perform the following tests after completing the above-mentioned checks:
- A smoke test, and they’ll use a scan tool to confirm that the EVAP solenoids and valves are operating properly.
Here’s a pretty good video on diagnosing these leaks from Scotty Kilmer, if you are interested:
Most common P0456 fixes
These are some of the most popular Challenger P0456 fix:
- Replacement of gas cap
- Replacing a EVAP line
- Replace charcoal canister
- Change the fuel tank
It is best to begin with the gas cap, and then work your way up to the fuel tanks. The gas cap is the most difficult and cost-effective item to replace.
Here’s a great video on How to check your gas cap.
We wish you all the best in finding out why your Dodge Challenger is throwing the code P0456. This should help. You can add any additional information by leaving a comment.
Do you consider P0456 to be a serious concern?
While P0456 is not going to cause the Challenger’s engine to stop running, it should not be treated lightly. Fuel leaks could be a problem. Check your fuel level to make sure it is not leaked. It is best to have it checked and/or dealt with immediately.
Please leave comments below if you have any suggestions. Thanks!
Leave a Reply