Chrysler 300 P0455 Code Diagnosis
This is one of the most commonly encountered trouble codes for the Chrysler 300 The P0455 Code. The trouble code refers to a number you receive when your 300 is plugged into an OBDII scanner. If there's a problem, P0455 indicates it. Leakage large In the evaporative emissions control system. This code is often found with or related to P0420,P0441 and, very frequently, P0440.
The P0455 issue is not usually a threat to your 300's driveability. Certainly anytime the service engine soon light is on, it’s good to deal with it as soon as possible though. This is usually accompanied with P0442. See Chrysler 300 P0442 OBDII Code for more.
Chrysler 300 P0455 Definition
P0455 refers to a general OBDII trouble code. The code can be used regardless of the make and model of the vehicle. Technically, the code stands for:
System Gross Leak – Evaporative Emission System
The EVAP system collects fuel vapor from fuel tanks and then sends it to the intake to ignite the engine in normal combustion. When there is a large leak in the Chrysler 300’s EVAP system, it will throw the P0455 OBDII Code.
Chrysler 300 P0455 OBDII Code Symptoms
The P0455 code is usually not accompanied with any other symptoms than those listed. The smell of gas And the service engine soon light. The slightest drop in fuel economy may also be noticeable.
Particular attention should be paid to the fuel tank or fuel filler tube smell.
The EVAP process deals with fuel vapors directly. If these vapors are leaking from the system, you’ll often smell them faintly while operating the vehicle.
300 P0455 Trouble code Causes
Many things can trigger the P0455 code in Chrysler 300. The most frequent problems that trigger this code are:
- Hose for Evap System– The hose that carries the fuel vapor from the fuel tank to the intake manifold can begin to leak. This can lead to the P0455 code. You should look for a hole or a tear in the code. This is the main problem that can cause the code.
- Vapor Canister Purge Valve– One of the most common causes of the P0455 code is the vapor canister purge valve. It’s really easy to replace. You will need to locate and take out a few clips.
- A Faulty Canister of Charcoal– The charcoal canister is often the cause of P0455.
- Fuel Tank Sending Unit– It is possible for the gasket that attaches the fuel sending unit to the gas tank to go bad. It can lower the tank pressure, which could throw out the code.
- Fuel Cap– A bad fuel cap can cause the code to be thrown for sure. Often, you’ll get a message informing you that the fuel cap is off even when it is on. You may not get the message but a P0455. This will save you time and money.
- Fuel Filler Neck– There is often a gasket where the fuel filler neck connects with the gas tank. It is possible for this gasket to dry, particularly if vehicles spend a lot of time in dry environments. When it dries out, the fuel tank can’t hold pressure anymore.
P0455 Diagnose- Chrysler 300
To diagnose the problem with your Chrysler 300, a mechanic will have a variety of tools at his disposal. The most commonly used methods to diagnose this code are:
- The mechanic will check for other codes. It is easier to diagnose problems if there are more codes. That’s because when they appear together in certain combinations, there will often only be only a few conditions that will throw any combination of codes at one time.
- Once the mechanic has determined the trouble codes associated with P0455, he or she will usually Take a look at the EVAP system. These include the line and purge valve.
- To ensure that the cap can withstand pressure, the mechanic will check it. If you are getting a warning that your gas cap is off, even when it’s on, replacing it will more than likely clear this code.
- Monitoring and checking the fuel tank pressure is a must.
- The mechanic will then perform the following tests after completing the above-mentioned checks:
- A smoke test, and they’ll use a scan tool to confirm that the EVAP solenoids and valves are operating properly.
Here’s a pretty good video on diagnosing these leaks from Scotty Kilmer, if you are interested:
While the trouble code may state that there is a “large leak” in the EVAP system of your Chrysler 300, the actual leak will most likely still look rather small. The “large” really is referring to how much pressure is being lost.
The Most Popular P0455 Fixes
Below are the 300 most popular P0455 fix:
- Replacing the gas cap
- Replacing EVAP lines
- Replace charcoal canister
- Replacing the fuel tank
It is best to begin with the gas cap, and then work your way up to the fuel tanks. The gas cap is the most difficult and cost-effective item to replace.
Here’s a great video on How to test your gas tank.
It's a good idea to try and figure out why your Chrysler 300 is throwing the P0455 error code. We trust this helped. Please feel free to add anything below.
Do you consider P0455 to be a serious concern?
While P0455 is not going to cause the 300’s engine to stop running, it should not be treated lightly. Fuel leaks could be a problem. You should pay extra attention to the level of your fuel tank and ensure that you're not leaking fuel. You should immediately take it in for repair or replacement.
Leave a Reply